loader image

Installation Guide

Join our Facebook Installer Group if you are:

1) A Professional and experienced installer who has worked with AluSplash before and are looking to find homeowners who require installation of their AluSplash panels.

2) Homeowners who are looking for Professional and experienced Installers to fit your AluSplash panels.

It is very important to plan your installation before you begin to mark or cut the AluSplash Panel Sheet.

Some handy tips to consider prior to the installation

  • Read through all of the installation steps below and the Installation guide
  • Decide on the installation method that you plan to use
  • Make sure you have all of the fabrication materials and tools ready before starting any work on the panels
  • Measure the area where you plan to install the AluSplash Panel and always double check your measurements
  • Ensure that you wear appropriate Personal Protective Equipment (PPE)
  • Always have a two-man lift approach to carry the panels around to avoid any potential injury
  • Make sure everything is levelled
  • Mark your measurements and work on reverse side of the panel
  • After cutting and before installation, always do a dry fit to ensure everything measures up and components fit together nicely
  • If things get difficult, get professional help

Join our Facebook Installer Group if you are:

1) A Professional and experienced installer who has worked with AluSplash before and are looking to find homeowners who require installation of their AluSplash panels.

2) Homeowners who are looking for Professional and experienced Installers to fit your AluSplash panels.

 

Tools & Material required for Installation

1. Measuring tape

2. Sand Paper

3. Glazier’s Suction Cup x 2

4. Handy Knife

5. Masking Tape

6. Builders Angel

7. Leveling tool

8. Neutral Cure Silicon Adhesive

9. Silicon Gun

10. Metal File

11. VHB Double Side Tape

12. 3mm packers

13. Metal seam roller- for rolled over edge finish

CIRCULAR SAW

(Using aluminium cutting blade)

Routing Machine

(Recommended Festool PF 1200)

Jigsaw 

(using aluminium cutting blade)

Hole saw or Drill 

(using HSS drill bits)

Chapter 1
Area Preparation

Chapter 2
Measuring

Chapter 3
Cutting

Chapter 4
Joining

Chapter 5
Edge Profile

Chapter 6
Seamless boxing

Chapter 7
Fitting

Chapter 8
Completion

WHERE TO BUY

Find your nearest store

ORDER SAMPLES

Order up to four samples

SIGN UP 

To the AluSplash Newsletter