AluSplash Installation

It is very important to plan your installation before you begin to mark or cut the AluSplash Panel Sheet.

Always check the label on each package for the batch number when joining two or more panels next to another. Panels from different batches may have a slight visual colour difference.

Some handy tips to consider prior to the AluSplash installation

• Read through all of the installation steps below and the full AluSplash Installation guide
• Decide on the installation method that you plan to use
• Make sure you have all of the fabrication materials and tools ready before starting any work on the panels
• Measure the area where you plan to install the AluSplash backsplash and always double check your measurements
• Ensure that you wear appropriate Personal Protective Equipment (PPE)
• Always have a two-man lift approach to carry the panels around to avoid any potential injury
• Make sure everything is levelled
• Mark your measurements and work on reverse side of the panel
• After cutting and before installation, always do a dry fit to ensure everything measures up and components fit together nicely
• If things get difficult, get professional help

Tools & Material required To Install AluSplash

10. Metal File

11. VHB Double Side Tape

12. 3mm packers

13. Metal seam roller- for rolled over edge finish

Hole saw or Drill

AluSplash Installation Process

It’s very easy to fit our aluminium backsplash, whether you are a professional fitter or a homeowner. The videos below will show you how to install AluSplash step by step.

Chapter 4
Joining

Chapter 8
Completion