loader image

Edge Profiles

Would you like your splashback to have a clean and professional looking finish?

AluSplash offers an exclusive range of edge finishing profiles that helps to cover exposed edges to give a sleek and clean look to your splashback.

Our profiles are available in two finishes: Silver Anodized or Anthracite Matt Grey. The profiles come with pre-applied 3M branded double-sided tape for quick and easy installation.

Please note: It is advised that the profiles are glued to the back of the panel, before it is installed to the wall.

For more information, take a look at our FAQ section

L shape Edge Profile
A must have for any project; our sleek and minimalistic L shaped profile helps to cover the exposed edges of an AluSplash Panel to give your kitchen a perfect and professional looking finish.

Lengths available(mm): 545 610, 800, 3050 and 4100*

U shape Edge Profile

Another option to cover the exposed sawed edges is the U-shaped profile, which is great if you are unable to cut the panel perfectly straight.

Available lengths(mm): 3050 & 4100*

Upstand – Worktop profile

This specially designed profile is to be used between the worktop and splashback. The profile is curved, making cleaning easier and keeping your kitchen worktop hygienic.

It is recommended to use silicone sealant on the bottom side of the profile for a watertight seal to avoid water seepage.

Available lengths(mm): 3050& 4100* in Silver Anodized finish only.

Internal Corner profile

A highly sought-after profile, the internal corner profile which connects two AluSplash panels in an internal corner construction. It can also be used when boxing around pipes or columns in combination with our external corner profiles.

Available lengths(mm): 545, 610, 800, 4100*

External Corner profile

This smart aluminum corner profile connects two AluSplash panels in an external corner construction. It can also be used when boxing around pipes or columns in combination with the internal corner profiles.

Available lengths(mm): 545, 610, 800, 4100*

Joining Strip

The joining strip is used on the back of the panel to connect two panels. It is smart and extremely simple as it provides a clean and seamless connection between two panels.

Available lengths (mm): 450, 540, 2000 in Silver Anodized finish only.

*4100mm is not available as standard in the U.K. *AluSplash profiles add an additional 1mm thickness at the back of the installed panels, so that the sealant can flow and dry correctly for a strong bond to the wall.

Gallery

SILVER ANODIZED

SILVER ANODIZED

SILVER ANODIZED

SILVER ANODIZED

WHERE TO BUY

Find your nearest store

MEMBER OF

SIGN UP 

To the AluSplash Newsletter

© 2020 Alusplash. All Rights Reserved. | Privacy Policy